GHG Emissions module
Not sure which emissions reporting applies to you? ThemisIQ is your guide.
Self-guided, or with advisors at the ready.
Scope 1, 2 and 3 under the GHG Protocol, built from your own bills and records, with the method and the factor edition kept behind every figure, traceable to your source documents where you've uploaded them.
Calculate your Scope 1 and Scope 2 emissions freeNo account needed to start. Create a free account to keep your results.From $550/yr
How people arrive here
A customer asked
A buyer wants Scope 1 and 2 figures, often on a questionnaire with a deadline and no explanation of what is being asked for.
A regulation applies
California SB 253, CSRD or a national scheme applies to your company, and the first reporting year is closer than it looks.
A lender or investor asked
Financing terms or an investment process now require emissions data that can survive a third-party check.
What the module covers
- Scope 1
- Stationary and mobile combustion, fugitive and process emissions, with fuel-level factors per jurisdiction.
- Scope 2
- Location-based and market-based in parallel, with grid region selection and residual mix citation where the market method applies.
- Scope 3
- All 15 categories recorded and reported. 9 calculated by a named method, 6 reported from your own figures.
- Monthly and annual
- Monthly from evidenced data only, annual from evidenced plus estimated, with billing periods prorated rather than rounded.
One inventory, collected once
| Scope coverage | Scope 1, 2 and 3 All 15 categories recorded and reported. 9 calculated by a named method, 6 reported from your own figures. Methods: spend-based, activity data on published factors, PCAF-aligned financed emissions, not calculated. |
|---|---|
| Audit trail | Every saved change logged Every saved change to a GHG inventory, CBAM disclosure or concierge record is written to an audit log by a database trigger, not by the application. Each entry records the user, the timestamp and the row as it was before. It covers those modules, and it records each save rather than each keystroke. You can read your own entries; you cannot edit or delete them. |
| Frameworks | SB 253 · CDP C6 · ESRS E1 · GHG Protocol · IFRS S2 · EcoVadis · SBTi One inventory covers each framework: SB 253, CDP C6 and C7, ESRS E1-6, EcoVadis, GRI 305 and IFRS S2. Your ThemisIQ report gives you the Scope 1 and Scope 2 figures to enter on the California Air Resources Board (CARB) SB 253 reporting platform, built on the GHG Protocol and traceable to your source documents where you've uploaded them. The Scope 3 Calculator, included with GHG Emissions, gives you your Scope 3 figures for when SB 253 requires them. |
| Emission factors | IPCC AR6 Scope 1 and 2 factors matched to each location's country: US EPA and eGRID (US), ECCC (Canada), DEFRA/DESNZ (UK), EU MRR/IPCC defaults and EEA (EU), DCCEEW (Australia) and MfE (New Zealand). A location in any other country is not priced and is named wherever the figures appear; it is never priced with another country's factors. IPCC AR6 GWPs by default; a factor published with its own GWP basis is applied as published. Every factor is cited on its workings row. |
| Price | From $550/yr Entry tier: 1 to 49 employees. Every plan covers unlimited locations; see all plans for larger organizations. |
How it works
- You bring
- Utility bills, fuel and refrigerant records, travel and supplier data. Upload what you have; gaps are flagged rather than filled silently.
- ThemisIQ applies
- The correct factor edition for each jurisdiction and year, the GWP set each framework requires, and proration across periods that straddle a year end.
- You get
- A complete inventory, framework-ready exports, an assurance pack and a verifier view you control access to.
How you stand behind it
Every figure keeps its method and its factor edition, and is traceable to your source documents where you've uploaded them, so a reviewer can follow those totals back to the bills they came from.
Your verifier can check the figures back to their source, through access you grant and can revoke. That covers Scope 1 and 2, CBAM, and Scope 3 Category 1 where you have opted in for that grant.
What it satisfies
Each of these is described, sourced and mapped to a module on the regulations page.
Pricing
Priced by company size, not by number of sites.
GHG is the one tiered module, priced by how many people you employ. Plans are sized using EU company size categories. Every plan covers unlimited locations. Add modules and the multi-module discount applies automatically: two modules −10%, three or more −20%.
Small
$550 / yr
1 to 49 employees, unlimited locations
Medium
$1,750 / yr
50 to 249 employees, unlimited locations
Large
$4,550 / yr
250 to 999 employees, unlimited locations
Enterprise
Contact us
1,000 employees or more, unlimited locations
Questions people ask first
We have never done this before. Where do we start?
With a utility bill. Upload what you have and the extractor reads electricity, natural gas, diesel, propane and gasoline automatically. Some documents it deliberately will not read: a refrigerant service record is a judgement call rather than a figure to lift off a page, and a renewable certificate states kWh certificated rather than kWh consumed. Those are kept as evidence and you enter the number yourself, because a confident-looking wrong number is worse than a blank.
Will this survive third-party assurance?
It is built for it. Every figure carries its method and its factor edition, and is traceable to your source documents where you've uploaded them; the assurance package is assembled for ISO 14064-3 and ISAE 3410 engagements, and your verifier sees the same view you do through access you grant and can revoke. ThemisIQ produces an assurance-ready package; the assurance itself is your verifier's to give.
What if you do not hold factors for one of our countries?
Six jurisdictions have their own published factor editions: the US, Canada, the UK, the EU, Australia and New Zealand. A location in a country we do not hold factors for is not priced: it is left out of every total, and it is named wherever the figures appear, so nothing is quietly missing. We never price it with another country's factors. Anything that cannot be converted confidently is flagged for review instead of being estimated, and refrigerants are a declared gap rather than a silent one.
Can we compare this year against last year?
Yes, and the comparison carries its own disclosure of what changed between the years. When last year's inventory is held on the platform, it names each Scope 1 and Scope 2 emission factor edition that changed and what that change alone does to this year's figures, or says why that could not be calculated; Scope 3 factor editions are not yet compared. A year-on-year movement can come from your emissions or from a factor revision, and a verifier needs to know which.
Why can't I confirm this bill?
Before a bill counts towards your emissions, we need two things from it: the amount you used, and the unit it's measured in. Sometimes we can't get both. The bill might use a unit we don't recognise, the figure might be unclear or hard to read, or the bill might show a charge but no usage. When that happens, we hold the bill back rather than guess, because a wrong number in your report is worse than a missing one. To fix it, open the bill and check what's printed. If the unit is wrong, choose the right one and we'll convert it. If the figure is missing, type it in from the bill. If the bill shouldn't be part of this inventory, reject it. Your report can't be exported while a bill is waiting, so nothing incomplete goes to your customer, lender or verifier.
What does Bill Review include?
Bill Review covers all your bills, for every location. Choose AI reading, where you confirm each figure, or have a ThemisIQ specialist read every bill for you. Includes Verification Readiness: an organized evidence pack and source-document index, ready to hand to your verifier. Bills read by a ThemisIQ specialist are read within 2 business days and are never sent to AI. To change how your bills are read later, ask us.
How does Bill Review get started?
Add your locations, then upload your bills, including any from earlier in the reporting year. Bill Review reads each one and has the figures ready for you to confirm. If you'd like hands-on help setting up your inventory, reach out via hello@themisiq.co.
Do I need Bill Review to use the GHG module?
No. The GHG module is fully self-serve. Bill Review is for teams who would rather not enter bills themselves.
How does ThemisIQ get my utility data?
You upload your bills and Bill Review reads them for you. You approve every figure before it goes into your inventory, and each one stays linked to its source record. Direct connections to utilities are coming soon, so your usage can come straight from your utility. If you'd like us to connect with yours, let us know at hello@themisiq.co.
What counts as a data source?
Every data source is included. A data source is one utility account or meter, however many bills it sends, such as an electricity account or a gas meter. A location with electricity and natural gas is usually two data sources.
How is Bill Review billed?
Bill Review is a yearly price for your GHG plan, with every data source and bill included, at every location: $600 Small (1 to 49 employees), $1,250 Medium (50 to 249 employees) and $2,750 Large (250 to 999 employees). Read by a ThemisIQ specialist: $1,000, $2,500 and $5,500. Your plan size is set by your number of employees. There is no onboarding fee and nothing is charged per source. The Enterprise plan is quoted. Specialist reading is priced one year at a time. We’ll confirm your renewal price at least 30 days before your term ends.
